UMC32+S USB-Serial Controller
Product Description
Firmware v1.0.0The UMC32+S is based on Hale Micro‟s UMC32+ DIY USB-MIDI controller. Unlike the original MIDI version, the S or Serial version provides users the ability to communicate with the device over a standard COM port. Communication with the device is achieved by sending simple alphanumeric commands/parameters via a terminal emulator (ex: hyper term) or your own application or script. This allows users a simple method for collecting data from external sensors, switches or turning on relays or actuators. Here are just a few features available in the first revision of the firmware.
- 32 individually configurable I/Os
- Multiple units can co-exist on the USB bus
- Small printed circuit board (1.7” x 3.3”) allows creating portable end devices
- Compatible with all versions of Mac OS X, Windows 7 / Vista / XP / 2000 and all versions of Linux
- USB bus powered. A single USB cable handles power and data.
- No firmware programming is necessary
- A redesigned PCB with dedicated GND and VCC planes for enhanced signal integrity
- I/O Configuration is now handled entirely by the configuration utility
- Connector for external status LED, on board status LED is now blue
- Standard USB TYPE B Connector
- AUX I/O block for future expansion (TBD)
- USB 2.0 Full Speed communication (12Mbit/sec)
- RoHS Compliant (lead Free), manufactured to IPC-A-610 Rev. B, Class II
- Mounting holes (#4 screw) near USB connector to provide additional support for USB insertion and removal
- Individual selection of each I/O‟s corresponding hardware type including:
- Digital Input (active low) - For receiving messages from sensors with active low TTL outputs
- Digital Input (active hi) - For receiving messages from sensors with active high TTL
- Analog Input (Raw)- 0-5V Analog Input, 12 bits (raw) (0 – 4095)
- Analog Input (Averaging) - 0-5V Analog Input, 11 bits Averaging filter (0 – 2047)
- Digital Output (active hi) – Useful for turning on LEDs or controlling external relays
- Upgradeable firmware via USB using Windows (XP/Vista/Window7 32 & 64 bit) bootloader utility
(Adobe's Acrobat reader is required)
UMC32+S USB-Serial Firmware v1.0.0
This package contains the most recent device binaries for updating the firmware of your UMC32+S.
Please note that the UMC32+S USB-Serial firmware is not compatible with the UMC32+ USB-MIDI Model.
UMC32+S USB-Serial CDC Drivers for Windows
These drivers provide the USB-Serial emulation for Windows machines.
UMC32+S USB-Serial Bootloader Utility v1.2
This package contains the Bootloader Utility application for the UMC32+S.
This application is compatible with ALL versions of Windows.
UMC32+S USB-Serial Bootloader Drivers for Windows
For use with the above Bootloader utility, compatible with (Windows XP, Vista & Windows 7 (64 & 32 Bit).
Hale UMC32+S support forum
This is the official Hale Microsystems UMC32+S user forum.
 |
UMC32+S USB-Serial Controller UMC32+S USB-Serial User Manual _______________________________________ (Item # UMC32+) $89.95 US Each |